Table of Contents
Polycarbonate injection molding produces tough, dimensionally stable plastic parts used in electronics, automotive components, and industrial equipment. But PC demands careful processing. Poor drying, unsuitable gate design, and uneven cooling can lead to surface defects, residual stress, and dimensional problems.
For OEM projects, HingTung considers material selection, part geometry, and mold design together. This guide covers PC grades, processing temperatures, design requirements, common defects, and the factors affecting production cost.
What Is Polycarbonate Injection Molding?

In PC injection molding, dried polycarbonate pellets are melted and forced into a steel mold. The plastic takes the shape of the cavity as it cools. Once it’s rigid enough, the mold opens and the part is ejected.
PC is often used for parts that need to survive impact without losing their shape. It can also be molded into transparent components. Unlike a flat PC sheet, injection molded polycarbonate can have screw bosses, ribs, mounting points, and snap fits formed in one piece. That can eliminate some secondary machining and assembly work.
Why Choose Polycarbonate for Injection Molding?
A clear cover that might be struck during use is one example of where PC makes sense. Acrylic offers good clarity, but PC is generally tougher. For an opaque housing, the choice is less straightforward. ABS or a PC/ABS blend may be sufficient, depending on temperature, impact requirements, and cost.
Advantages and Limitations of PC

A few properties explain why PC appears so often in industrial plastic parts:
- Impact strength: PC handles impact well, although performance still depends on the grade, wall thickness, and temperature.
- Clarity: Unfilled transparent grades typically transmit around 88–90% of visible light.
- Heat resistance: Its glass transition temperature is roughly 145–150°C. That’s a material property, not a recommended continuous operating temperature.
- Dimensional stability: Compared with nylon, PC takes up less moisture, so humidity generally has less effect on part dimensions.
PC has its weak points. Some cleaners and solvents can cause cracking, especially around stressed features such as screw bosses. It also scratches relatively easily. And in the molding machine, its high melt viscosity leaves less room for poor gate design or unsuitable temperature settings.
Common Polycarbonate Grades
Different polycarbonate grades for injection molding serve different requirements. A grade selected for optical clarity may be unsuitable for a heavily loaded structural component.
| Material Grade | Suitable Applications | Main Limitations |
| General-purpose PC | Housings, covers, mechanical components | Chemical sensitivity and scratching |
| Optical-grade PC | Transparent covers, selected lenses | Strict surface and stress requirements |
| UV-stabilized PC | Outdoor covers and exposed parts | Long-term performance remains grade-dependent |
| Flame-retardant PC | Electrical and electronic housings | Additives may affect flow and toughness |
| Glass-filled PC | Stiff brackets and structural parts | Opaque appearance and directional shrinkage |
| PC/ABS blend | Housings requiring balanced processing and mechanical properties | Different properties from pure PC; formulation-dependent |
PC/ABS is a polymer blend, not a grade of unmodified polycarbonate. ABS may be more economical and easier to process for certain opaque housings, while PC is often preferred for higher impact or transparency requirements. These trade-offs are explored in ABS vs PC injection molding.
Polycarbonate Injection Molding Process
With PC, the condition of the resin matters as much as the machine settings. Wet material can leave visible streaks on a part even when the mold is running consistently.
Material Preparation and Drying
PC absorbs moisture from the air. If too much water remains in the pellets when they enter the barrel, it can break down polymer chains at processing temperature. A part may still fill the mold, but its appearance and strength can suffer.
Some standard PC grades call for drying around 120°C for 2–4 hours, with a target moisture level of 0.02% or less. These are reference values, not settings for every grade. The resin supplier’s data sheet takes priority.
Drying also needs to continue effectively through material handling. Leaving dried pellets exposed to humid workshop air can undo part of the preparation.
Step-by-Step Injection Molding Process

The polycarbonate injection molding process can be broken down into six steps:
- Dry the resin. Check the grade requirements and moisture level before production.
- Melt the pellets. Set the barrel temperature and screw conditions to produce a consistent melt without excessive residence time.
- Fill the cavity. The melt needs to reach thin sections and flow ends before freezing, without generating excessive shear.
- Pack the part. Holding pressure compensates for shrinkage while the gate is still open.
- Allow it to cool. Uneven cooling can distort the part, particularly where wall thickness changes.
- Eject and inspect. Check critical dimensions and visible defects after the part has cooled sufficiently.
A good-looking part isn’t necessarily stress-free. Transparent covers and parts with tight assembly fits may need additional checks beyond ordinary visual inspection.
Key Processing Parameters and Temperatures
The following polycarbonate injection molding parameters are reference values drawn from published technical data for selected PC grades.
| Parameter | Reference Value | Engineering Note |
| Drying temperature | Around 120°C | Follow the selected resin datasheet |
| Drying time | Approximately 2–4 hours | Depends on grade and dryer |
| Moisture content | Typically ≤0.02% | Check the grade specification |
| Melt temperature | Approximately 270–320°C | Grade-dependent |
| Mold temperature | Approximately 80–120°C | Depends on grade and surface requirements |
| Molding shrinkage | Approximately 0.5–0.7% for selected unfilled PC grades | Verify flow direction, geometry, and test conditions |
| Injection pressure | Part- and mold-dependent | Validate during trials |
| Injection speed | Adjust to filling behavior | Avoid excessive shear and trapped air |
These values are starting references, not universal settings. Polycarbonate injection molding temperature must follow the specific resin datasheet and be adjusted for part geometry and processing conditions. Likewise, polycarbonate injection molding shrinkage varies by grade and filler content, so final mold dimensions should be verified through molding trials.
Design Guidelines for Polycarbonate Injection Molded Parts
Part design influences filling pressure, cooling behavior, dimensional accuracy, and long-term durability. For PC, avoiding unnecessary stress concentrations is particularly important.
Wall Thickness, Ribs, and Draft Angles

A practical starting wall thickness for many conventional PC parts is approximately 1–4 mm, although the achievable minimum depends on resin flow, geometry, and tooling.
- Wall thickness: Keep sections as uniform as possible and avoid sudden transitions.
- Ribs: Start around 50–60% of nominal wall thickness where visible sink marks are a concern.
- Corners: Use radii rather than sharp internal corners.
- Draft angles: Around 1–2° per side may suit uncomplicated surfaces, subject to texture and part depth.
- Bosses: Core out thick sections and use suitable support ribs.
These are starting guidelines, not fixed design limits. A DFM review for injection molding should consider the selected grade, expected loading, and molding constraints together.
Gate Design, Weld Lines, and Residual Stress

Gate size and location affect melt flow, shear, packing, and residual stress. An undersized gate may cause high shear and visible gate blush, while poorly positioned gates can create weld lines across loaded areas.
For clear polycarbonate injection molding, flow marks and weld lines may also affect appearance or optical performance. The selection of injection molding gate types should account for both filling efficiency and acceptable gate marks.
Excessive packing pressure can contribute to frozen-in stress, particularly around the gate. Screw bosses and snap fits introduce additional assembly stresses. When these stresses combine with sharp corners, interference fits, or chemical exposure, cracking may appear weeks or months after molding.
Gate placement, packing conditions, boss geometry, and snap-fit deflection should therefore be reviewed together—not as separate design decisions.
Common Polycarbonate Injection Molding Defects
Polycarbonate injection molding defects often result from moisture, improper filling, uneven cooling, or residual stress. Common problems include:
- Silver Streaks and Bubbles: May result from moisture, excessive shear, or trapped air. Check resin drying, gate conditions, and mold venting.
- Warping: Often caused by uneven cooling or packing. Check mold temperature balance and wall thickness.
- Sink Marks and Voids: Usually occur around thick sections or insufficiently packed areas. Review part geometry, holding pressure, and gate freeze-off time. Persistent sink marks in injection molding may require design changes.
- Weld Lines and Flow Marks: Can result from converging melt fronts or unstable filling. Review gate placement, melt temperature, and injection speed.
- Stress Cracking: May develop around bosses, snap fits, or sharp corners under residual stress, assembly loads, or chemical exposure.
For polycarbonate injection molding troubleshooting, identify defect locations, verify material conditions, and adjust one processing variable at a time.
When silver streaks appear on molded PC parts, check the resin’s moisture content first. If drying meets the material specifications, examine where the streaks occur. Marks concentrated near the gate may indicate excessive shear, while those near the end of the flow path may suggest trapped air or poor venting. Confirm the cause through controlled molding trials before adjusting the tooling or processing conditions.
Applications of Injection Molded Polycarbonate

Polycarbonate injection molded parts are used where mechanical toughness, transparency, or heat performance is required.
Common examples include:
- Automotive: Interior housings, lighting components, and selected transparent covers.
- Electronics: Device enclosures, connectors, and protective panels.
- Industrial equipment: Machine guards, inspection windows, and control housings.
- Safety equipment: Protective eyewear, visors, and impact-resistant shields.
- Lighting: Diffusers, covers, and selected optical components.
In clear plastic injection molding, PC is often compared with acrylic (PMMA). PC generally offers higher impact resistance, while PMMA can provide better surface hardness and scratch resistance.
Glass-filled PC is more appropriate for selected stiffness-driven applications than transparent components. The chosen grade must meet the actual mechanical, environmental, and appearance requirements.
Polycarbonate Injection Molding Cost Factors
Polycarbonate injection molding cost is influenced by material requirements, processing conditions, cosmetic acceptance criteria, and inspection demands.
The main considerations are:
- Material grade: Optical, flame-retardant, UV-stabilized, and reinforced grades can carry different resin costs.
- Drying requirements: Controlled drying adds equipment use, energy consumption, and material-handling requirements.
- Mold temperature: Higher-temperature mold control may affect energy use, cooling arrangements, and cycle time.
- Surface quality: Transparent parts may require finer mold finishes, stricter contamination control, and higher cosmetic acceptance standards.
- Quality inspection: Dimensional measurements, optical checks, and stress-related evaluations may increase inspection effort.
- Scrap and rework: Surface defects or dimensional rejection can raise the effective cost per accepted part.
For projects with different annual volumes, plastic injection molding pricing and volume also affects how tooling and recurring production expenses are evaluated.
Two quotations using the same nominal PC material may differ because they assume different grades, drying controls, cosmetic standards, and inspection requirements. These assumptions should be clarified before comparing unit prices.
Conclusion
Reliable polycarbonate injection molding depends on matching the resin grade to the part, controlling moisture and temperature, and designing against residual stress and dimensional defects. Small changes in tooling or processing can have significant consequences for appearance and long-term performance.
For a PC component project, contact HingTung with your drawings, material specifications, expected volume, and quality requirements to discuss your needs and request a quotation through its plastic injection molding services.
